Product Details
The straw picking and baling machine is used to pack the remaining straw and forages in the rural areas, such as corn straw, straw, cereal grass, peanut straw, and sheep grass. It is mainly used as feed for ruminants such as cattle and sheep and can be used as reserve feed in pastoral areas. At the same time, the storage and transportation problems of forage are solved. The bales formed by the baler have a high density, and the bales are tight inside and outside, and have good air permeability, which is convenient for transportation and storage. The promotion and use of this machine has played a huge role in resolving straw recycling, improving environmental pollution caused by burning straw in rural areas, and improving the quality of straw utilization.
The wheat straw baler is mainly composed of a picker, a baling mechanism, a baling chamber, a compression piston, a transmission system and a frame. This equipment is used by tractors as a traction to walk across the straw, matching the power of 18-50 horsepower, and the tractor's power shaft as the output power, automatic pickup, automatic feeding, automatic baling, automatic rope cutting, and can be adjusted by components In order to change the density of bales during baling, automatic baling and other processes are completed at one time, so that the bales will not be scattered, not messy, and lined up on the ground. It greatly reduces labor intensity and is the preferred equipment for biomass straw power plants and farmers.
The following points should be grasped during the operation:
1. The driver should be proficient in driving operation techniques. During operation, you should drive in the center to prevent large heads from bundling.
2. The bundling rope has an external draw structure, with few knots and high strength, to prevent broken ropes or stuck ropes.
3. The throttle should be stable when sending the rope. Keep the medium-speed throttle to ensure the quality of the rope.
4. When the rope feeding stops, move the hydraulic valve immediately, do not stop, so as to avoid the bales being rubbed by the pressure roller. The bales should not be slowed down so that the bales can be released by rotational inertia.
| Model |
NKST-50*80 |
Model |
NKST-70*100 |
| Matched horse power |
20-50hp |
Matched horse power |
26-50hp |
| Power transmission method |
PTO shaft |
Power transmission method |
PTO shaft |
| Working speed |
1-1.5m/s |
Working speed |
2.5-3.0m/s |
| Collecting width |
800（mm） |
Collecting width |
1000（mm） |
| Baling type |
Interrupt and hydraulic type |
Baling type |
Interrupt and hydraulic type |
| Bale diameter*length |
500*800（mm） |
Bale diameter*length |
700*1000（mm） |
| Bale weight |
15-25kg |
Bale weight |
30-50kg |
| Machine size |
2000*1490*1575（mm） |
Machine size |
2300*1600*1450（mm） |
| Machine weight |
550kg |
Machine weight |
870kg |
